Fiber tape product information
Fiber tape color: usually white.
Specification of fiber tape: 8 × 8.9 × 9 mesh / inch: 55-85g / m2.
Fiber tape width: 25-1000 mm; length: 10-153 M.
Construction method of fiber tape
1. Keep the wall clean and dry.
2. Stick the tape on the crack and press it tightly.
3. Confirm that the gap has been covered by the tape, then cut off the rest of the tape with a knife, and finally brush the mortar.
4. Let it air dry naturally, and then polish it gently.
5. Fill enough paint to make its surface smooth.
6. Remove the leaked tape. Then, pay attention that all cracks have been properly repaired, and decorate the area around the joint with fine composite materials to make it as clean as new.
Fiber tape is made of pet as the base material, reinforced polyester fiber line inside, and coated with special pressure-sensitive adhesive. Fiber tape has excellent wear resistance, moisture resistance, strong breaking strength, special pressure-sensitive adhesive layer has excellent lasting adhesion and special performance, which makes it widely used.
Fiber tape is not a high-tech thing, it is also a kind of common tape. But because the material and method of manufacture are related to fiber, it is called fiber tape. The difference between fiber tape and common tape is that the raw material of fiber tape is PET. There is polyester fiber line used for reinforcing effect in the fiber tape, and special pressure-sensitive adhesive is used on the surface of the fiber tape, so that the strength of the fiber tape is particularly large.
The main characteristic of fiber tape is its strong breaking strength, that is to say, it will not break easily. The second advantage of fiber tape is that it has good moisture resistance. He won't lose his gel when he meets water like ordinary tape. It can be used in humid environment, and the effect won't be very bad.
Use of fiber tape:
There are many uses of fiber tape. It can be used to glue things like ordinary tape. It can also be used to do things that ordinary tape can't. Next, I will list the uses of fiber tape for you.
Adhesive: the first function of fiber tape is to bond things, which is also the most basic function of all tapes, fiber tape is no exception. And fiber tape is better than ordinary tape for bonding things.
Repair wall panel cracks: the special feature of fiber tape is that it can be used to repair wall cracks and wall damage. Because the raw material of the fiber tape is pet, it has the function of repairing the wall.
Sealing: another function of fiber tape is to seal things, such as packing boxes. Because the fiber tape has a good moisture-proof effect, it will not worry about the sealed things because of the long time. This is also one of the advantages of fiber tape.
