You are here: Home > News > Company News >

Cautions and storage and transportation maintenance of warning tape

Publish Time: 2020-09-25   Views:
Warning tape has the advantages of water-proof, moisture-proof, weather resistance, anti-corrosion and anti-static, and is suitable for the anti-corrosion protection of underground pipelines such as air pipes, water pipes and oil pipelines.
Instructions for use of warning tape
When the marking tape is used for area division, it is called marking tape or area tape; when it is used as warning, it is called warning tape. But actually both are the same thing. When it is used for regional division, there is no relevant standard or convention to specify what kind of area needs to be divided by what kind of color. Green, yellow, blue and white are widely used. When used as a warning, according to GB 2893-2001 "safety colors" and "warning signs of occupational hazards in workplace" issued by the Ministry of health in 2003, monochromatic red, yellow, green, and two-color red, white, green, white and yellow black can be used as warning lines. Here, we suggest to make a distinction between marking tape and warning tape. White, yellow and green are used for marking; red, red white, green white and yellow black are used as warning.
When used as a warning, red means forbidding and preventing; red and white stripes indicate that people are forbidden to enter dangerous environment; yellow and black stripes indicate that people should pay special attention; and green and white stripes indicate more eye-catching notices.
 
Storage, transportation and maintenance of warning tape
1. The tape should be stored in the warehouse to avoid sunlight and rain; it is forbidden to contact with organic solvent of acid-base oil, keep clean and dry, and the room temperature is between - 15 ℃ and 40 ℃ 1 m away from the discovery device.
2. The tape should be placed in rolls and not folded. If it is stored for a long time, it should be turned over once a season.
3. When loading and unloading the conveyor belt, it is better to use the crane, and use the sling with crossbeam to lift it stably to avoid damaging the belt edge, and not to load and unload arbitrarily, which may cause loose coil and swing sleeve.
4. The type and specification of the tape should be selected reasonably according to the needs and specific conditions.
5. It is not allowed to use the tapes of different varieties, specifications, models, strength and cloth layers together.
6. In order to improve the reliability and maintain the high effective strength, it is better to use the hot vulcanized rubber joint for the conveyor belt joint.
7. The diameter of the conveyor roller and the minimum diameter of the belt pulley should meet the relevant regulations.
8. Do not make the belt snake or creep, keep the drag roller, vertical roller flexible, and moderate tension.
9. When the conveyor is equipped with baffle and cleaning device, the abrasion of the belt should be avoided.
10. Cleanliness is the basic condition for the good operation of the belt. Foreign substances will affect the eccentricity, tension difference and even fracture of the belt.
11. When the tape is found to be damaged in the early stage, the cause should be found and repaired in time to avoid adverse consequences.
TOP